
Electrical fixture installation in Irvine for ceiling lights, wall lights, extractor fans, heaters and other fittings. We check each fixture suits the room and circuit, fix it securely and test it before we leave.
A large pendant or chandelier can be too heavy for a standard ceiling rose. Heavier fittings need a secure fixing into a joist or a support plate, and the right ceiling hook. We check the weight before fitting, so the light stays safely in place for years.
Bathroom and kitchen fans need ducting to the outside and the right controls. A fan with a timer keeps running after you switch the light off, while a humidity sensor turns it on when the room gets steamy. Both help keep damp and mould under control.
Electric heaters and towel rails are usually wired to a fused spur, often with a timer. In a bathroom, they must sit the right distance from the bath or shower, or be rated for that zone. We check the circuit can take the extra load before connecting.
Tell us what you're fitting and where, and send a link or photo of the fitting if you have one. We check the weight, power rating and any bathroom or outdoor requirements, then give you a free quote that covers fixings, cabling and controls.
On the day, we isolate the circuit, remove the old fitting if there is one, fix the new one securely and connect it. We test the circuit and the fitting, set any fan or timer correctly, and leave the area tidy.
Tell us what the problem is or what you'd like done. We aim to respond the same day.
We look at the job and give you a free quote, with no obligation and no call-out charge.
We carry out the work, test everything we've worked on and leave you the right certificate for the job.
Yes. We check the weight and the fixing method, then fix it securely into a joist or a support plate rather than relying on a plastic ceiling rose. Heavy or very tall fittings may need two people, so let us know the size when you book.
Yes. A like-for-like fan can usually be swapped quickly. If your current fan is noisy or doesn't clear steam, a model with a timer or humidity sensor often works better. We check the ducting runs to the outside, as a fan venting into the loft causes damp.
Swapping a light fitting like-for-like is simple work, but mistakes with earthing or connections can be dangerous. If the fitting is heavy, in a bathroom or outdoors, or if the wiring looks old, it's safest to use an electrician who will test the circuit.
Yes. An electric towel rail can be wired to a fused spur outside the bathroom or one rated for its zone, often with a timer or switch so it doesn't run all day. If your towel rail runs on the central heating, an electric element can be added for summer use.
Use the links below to see fixture installation in your area.
Send us a photo or link of the fitting and where it's going, and we'll quote for fitting it.