Emergency lighting installation & testing in Irvine
Emergency lighting installation & testing in Irvine for shops, offices, workplaces and shared stairwells. We fit the right fittings for your escape routes and carry out the monthly and annual tests you need to record.
- 5 years in business
- No call-out charge
- Free, no-obligation quotes
- 24/7 emergency call-outs
Emergency lighting installation & testing for Irvine premises
- 01
Who needs emergency lighting
Most workplaces, shops, offices and buildings open to the public need emergency lighting on escape routes, and so do the shared stairs and corridors in many blocks of flats. Your fire risk assessment, required under the Fire (Scotland) Act, should say where it's needed.
- 02
Maintained and non-maintained
Non-maintained fittings only light up when the power fails, while maintained fittings stay on all the time and keep going in a power cut, which suits places like bars and venues. Exit signs and fittings over doors, stairs and changes in level show people the way out.
- 03
Monthly and yearly testing
Emergency lights should be tested monthly with a short flick test to check each one comes on, and once a year with a full-duration test, usually three hours, to prove the batteries last. Results go in a log book, which inspectors may ask to see.
What to expect from emergency lighting installation & testing
For a new system, we look at your escape routes, exits, stairs and any fire risk assessment, then plan fittings and signs to cover them. For an existing system, we check what's installed and when it was last tested. Either way, you get a free quote first.
Installation is planned to keep disruption low. Once everything is fitted, we carry out a full-duration test, record the results and set up a log book. For ongoing testing, we can carry out the annual test and repair or replace fittings that fail.
What's included
- Escape routes checked
- Fittings and exit signs planned
- Maintained or non-maintained options
- Full-duration test on completion
- Log book set up
- Failed fittings repaired or replaced
How it works
Call or send a message
Tell us what the problem is or what you'd like done. We aim to respond the same day.
We visit and quote
We look at the job and give you a free quote, with no obligation and no call-out charge.
Done, tested and certified
We carry out the work, test everything we've worked on and leave you the right certificate for the job.
Emergency lighting installation & testing questions
How often should emergency lighting be tested in Irvine?
A short functional test should be carried out every month, and a full-duration test once a year. The monthly test can be done by a responsible person on site using a test key, while the annual test checks the batteries last their full rated time.
Does a block of flats in Irvine need emergency lighting?
Many do, particularly where the common stairs and corridors have no natural light or are the only way out. The building's fire risk assessment should confirm what's needed. Factors and residents' associations often arrange regular testing to keep the common areas safe.
What happens if an emergency light fails its test in Irvine?
A failed fitting usually has a worn-out battery, a faulty lamp or a broken charging circuit. We record the failure, then repair or replace the fitting and retest it. Leaving a failed light in place can leave part of an escape route dark when it matters.
Can old emergency lights in Irvine be swapped for LED?
Yes. LED emergency fittings use less power, last longer and often have self-test features that check themselves and show a warning light if something's wrong. Swapping old fluorescent fittings for LED is a common upgrade when batteries or tubes start failing.
Emergency lighting installation & testing across North Ayrshire
Pick your area to see emergency lighting work near your premises.
Book emergency lighting installation & testing in Irvine
Tell us about your premises and when the lights were last tested, and we'll quote for installation or testing.